Contact Us

more info...

You can contact us via Email or 24 hours available phone:
( +91) 9831187962

Quick Links
Client Testimonials
Sitemap
logon2cad logo

Logon2cad provides CAD Conversion Services, 3D Modeling services, 3D rendering services, Character animation services, CAD drafting services, Character design services, Character modeling services

 

Point Co-ordinate Transformations

Reading external ASCII files through a Point File Format creates cogo_points. Civil 3D has several pre-defined file formats. When using a Point File Format, it assumes the coordinate system or local coordinates match between file and drawing. However, there are times when the file and the drawing have different coordinates systems, i.e. NAD27 coordinates in the file and NAD83 for the drawing's coordinate system. If the file and drawing's coordinate systems differ and you want to transform the coordinates on import, then the Point File Format must have an assigned coordinate system. A coordinate system is assigned in the file-format definition panel's middle left.

The second place coordinate transforms can occur when importing points directly into a surface. The point files process is exactly the same as importing points from an ASCII file to the drawing, but the resulting points do not become cogo_points, rather they become surface points.

The last place where point coordinate transformations may occur is when inserting survey points into a drawing. If the survey and drawing have different systems, the point coordinates transform when inserting them into the drawing. Also, when a survey's units are U.S. survey foot and the drawing uses international feet, when inserting the survey points into the drawing, a transformation occurs. Defining a Point File Format with a Coordinate System There are two places to define a Point File Format. The first is the Setting panel's Point branch, and as the second is a modification or copy of a format in the Import/Export Points dialog box.
After assigning a coordinate system to the format, you should change the Northing and Easting entries to Grid Northing and Grid Easting. To do this, in the Point Format dialog box (Figure 1), click the Northing heading and in the Select Column Name dialog box, click the drop list arrow, and, from the list, select Grid Northing. Repeat this for the Easting heading.

Transferring Point File Formats.

If you develop several Point File Formats, they are available only to their drawing. You transfer the formats to other drawings or the template file through the drag-and-drop method used to transfer styles.

To transfer the format to a template, open the template file while still in the drawing containing the new point file formats, and in the Windows menu select Tile Vertically. This allows you to view both the drawing and the template at the same time. In the drawing with the new Point File Format, expand Setting's Point branch until viewing the Point File Format list. From the list, select the new Point File Format, and while holding down the left mouse button, drag it to the template file. When lifting up on the left mouse button, the file format is added to the template.

Using a Transformation Point File Format

Selecting a point file format with an assigned coordinate system is only the first step to importing and transforming points. After selecting the format and the file to import, you must toggle on Do coordinate transformation if possible.

Exporting Points

Having an assigned coordinate system is also available as an export points format. If you want to export NAD 83 point coordinates to NAD 27, in the Export points dialog box, you would assign a NAD 27 format, toggle on Do coordinate transformation if possible, and when exported, the resulting file contains NAD 27 coordinates.

Surface Definition -- Point Files

When adding point data to a surface, they can come from either a point group or directly from a point file. When directly importing points to a surface, the points appear only as surface points and not cogo_points. The interface for importing points to a surface is the same as the Import points command. If you use a point file format that has an assigned coordinate system and wanting to transform the points to the drawing's system, following the same steps mentioned above for importing points will transform them to the drawing's system.

Transformations When Inserting Points From Survey

Related to point file formats with differing coordinate systems, is collecting survey data in one coordinate system and inserting the Survey points into a drawing with a different system. For example, conducting a survey in NAD 83 and inserting its points into a NAD 27 drawing, causes the point coordinates to transform from NAD 83 to NAD 27. The Survey command, to create network control points from drawing points, also transforms points from the drawing coordinate system to the survey system.

In Survey, you do not need coordinate systems to cause a transformation. If collecting a survey in U.S. foot and inserting survey points into a drawing using international feet will cause the point coordinates to change. You must make every effort to keep the survey and drawing units the same.

 

Home About Us Contact Us Services Client Testimonials Sitemap Articles Samples Pricing Career FAQs

Service Summary :

CAD Design & Drafting Format Conversion CAD Conversion
Drafting House Plans PDF to DWG Conversion Paper to CAD Conversion
Mechanical Drafting DGN to DWG Conversion Scan to CAD Conversion
2D CAD Drafting Services 2D to 3D Conversion DWG Conversion
Architectural Drafting MCD to DWG Conversion DGN Conversion
CAD Design PDF to DGN Conversion Multi-Layer CAD Conversion
CAD Drafting Services TIF to DOC Conversion Legacy Drawing Conversion
Structural CAD Designing TIF to DWG Conversion Digitization Services
Electrical Drafting 3D Animation Graphics Designing
Fire Protection System Character Animation Brochure Design
Power Distribution System Camera Animation Banner Designs
Power System Architectural Animation Cover Page Design
Lighting System Walkthroughs Package Design
Plumbing System Advertisements Product Design
HVAC System Short Films Visiting Card Design
Electronic Drafting Logo Animation Dangler Design
Structural Steel & Detailing Animated Intros

Greeting Card Design

Call to: Bpology
Developed by, logon4web.com
© 2009 logon2cad.com. All rights reserved